High pressure hoses are designed to hold enormous amounts of pressure over extended periods of time. Despite their immense power, however, high pressure hoses do need to be maintained in order to perform well. One way to keep a high pressure hose in good working order is by following some basic maintenance tips. Hose maintenance should always begin with a visual inspection of the hose assembly. This should include checking for damaged or worn parts as well as checking the hose for signs of leaks and other potential hazards. Hose assemblies should also be drained and flushed when possible to prevent contamination. Additionally, hoses should never be handled while under pressure. If a high pressure hose is found to be leaking or displaying any other potential hazards, it should be replaced immediately. Attempting to repair a leaking hose can result in permanent damage, and using water sealant or duct tape will not be enough to protect the hose against further damage. When selecting a replacement for your high pressure hose, it is important to consider the hose's intended use. The most durable hoses are designed for industrial applications and can withstand very high pressures. High-quality hoses also have an extremely small bend radius at maximum flow, making them ideal for applications in the construction industry. In addition to its durability, an industrial hose will need to be capable of withstanding very high temperatures. This means that the hose will need to be made from a highly resistant material. Typically, this type of high-pressure hose will be constructed from thermoplastic materials. High-quality thermoplastic hoses will have an outer layer that is abrasion-resistant, antistatic and UV-resistant. The inner tube will be reinforced with high-tensile steel wire and a rubber or thermoplastic liner. Unlike other cleaning methods, ultra high pressure hose does not create dust. This makes it suitable for use in cleanroom environments and other sensitive areas. Water jetting is also highly effective at removing dirt, corrosion and embedded crystallised salt. In addition, this method of cleaning is safe for use on aluminium and other alloys, as it does not cause them to deform or crack. In addition to its durability and versatility, ultra high pressure hose is also highly economical. This is because it can be used in applications that would otherwise require the use of abrasive blast media. Additionally, this hose is up to 25% lighter than PVC-covered hoses and has built-in abrasion resistance that eliminates the need for an additional abrasion-resistant sleeve. This allows for a greater reduction in overall assembly weight and costs, as well as reduced operator fatigue.